Length: 15 (ft)
Height: 4.4 (ft)
Width: 5.8 (ft)
Weight: 1,777 (lbs)
MAXIMUM TRAILER CAPACITY(GVWR): 4400 (lbs)
Quality close weaved canvas 18oz (1.12lbs) roof & 16 oz (1 lbs) walls.
Self-supporting modern design freestanding without guide ropes. (Depending on weather conditions.)
New design upgraded fold out frame enables quicker setup of tent.
Quality PVC floor with 4” high PVC floor to prevent water seepage.
Heavy duty SBS zips throughout.
Heavy Duty 0.12lbs/sq ft PVC travel cover with 8 x large tie down points, the cover has both velcro and zipper for maximum water and dust prevention
Annex walls are removable in 3 parts with velcro for personal configuration.
Clear PVC skylight for bedroom with internal canvas cover.
Ventilation vent in bedroom.
Both mosquito and midge proof mesh used on all doors and windows.
Large windows throughout tent for increased ventilation.
Access to trailer via 2 trap doors. (Main bedding area)
All stress points are fully reinforced.
All stitching is seam taped.
Access to trailer via velcro skirting when erected.
Internal storage pockets included.
Bed board constructed from 20 mm marine plywood.
Extra spreader poles
Fixed Section: 5.35m x 2.40m
Annexe Section: 5.35m x 2.40m
Highest Point: 2.60m
Lowest Point: 1.80m
Trailer Size: 7x4ft (& internal depth 20”)
Drawbar: Electrophoresis / Galvanised 4”x2”x0.12” extended length 6FT. (Draw bar extended to front spring hanger for extra stability, cornering, reversing and strength.)
Chassis: Duragal tube reinforced chassis (2”x2”x0.12” RHS.) All stress points on the chassis and drawbar have been reinforced.
Brakes: Heavy Duty 10-inch electric brakes with handbrake.
Wheels & Tyres: Brand new tyres with 15” “Sunraysia” wheels. (6 stud Landcruiser Pattern)
Construction: Zincanneal Checker plate body, welded and sealed.
Finish: Black Hammertone powder coating. (Durable and scratch resistant.)
Jockey Wheel: 10” swing-up & lockable
Jerry Can Holders: 2 x Lockable military style 5 gal Jerry Can Holder.
Gas bottle holders: 2 x Lockable 8.8lbs gas bottle holder.
Tailgate: Swing gate door with 2 x T-Locks & pinch rubber seal with latch to secure kitchen/tailgate.
Lights: Large LED fully submersible tail lights, number plate light and clearance lights.
Stabiliser Legs: 2 x Heavy Duty lockable & adjustable. (wind down spindle supplied.)
Light Connection Plug: 7 pin flat plug
Mount on rear tailgate for spare.
Guards & Gussets: Double folded for maximum strength.
Quality Marine Carpet throughout the camper.
Safety Chains: ADR Approved Dual Safety Chains.
Lighting: Internal LED light with switch to light up box section